What if the kitchen sewer is blocked? Teach you a few moves, the effect is super good, dirty hands!

The kitchen sewer is full of oil and waste.

Professionals compare the inner wall of the kitchen drainage pipe to human blood vessels.

If you usually wash the dishes, always pour the leftover rice residue and frying waste oil into the pipe of the dishwasher.

It is conceivable that animal and vegetable oils in food residues will adhere to the inner wall of the pipe.

When the grease is mixed with the leftovers, coffee grounds, hair and other wastes discharged with the sewage, thicker and thicker dirt and oil sludge will be formed in the sewer pipe.

The oil sludge accumulated in the pipeline for many years is the main cause of sewer blockage. Like the blood vessels of patients with high cholesterol, there will be big problems.

Therefore, in order to avoid pipe blockage, the following good habits should be formed in daily life:

After frying food, do not pour hot oil directly into the sink.

After the oil cools, pour it into the waste plastic bag and treat it as kitchen waste.

It's best to clean the sink with hot water once a month.

The cleaning powder can be poured into the pipe, and then the pool is filled with hot water. Later, the hot water can be flushed into the pipe.

Tea foam, coffee grounds and other debris are easy to accumulate in the pipeline.

On weekdays, reduce food residues, pick up the debris in advance, or put it into the bowl and pool drain with a small fine mesh grate.

Tips for dredging the pipeline

1. Boiled water to deal with grease blockage

Grease in the sewer will harden after cooling.

Therefore, boiling water flushing is the simplest and cheapest method.

After draining the accumulated water in the sewer tank as far as possible (the treatment effect is more thorough overnight), pour at least 1 liter of boiling water.

In case of being scalded, take it with a plunger.

2. Baking soda + salt or vinegar + boiling water

Pour the mixed solution of baking soda and half a cup of salt into the sewer. At this time, an exothermic reaction will occur, releasing steam and bubbles.

After standing for several hours, the effect of flushing with boiling water is more significant.

3. Water + detergent or washing powder + boiling water

Mix and boil the water and detergent, pour it into the sewer and wait for the solution to work.

Then wash the sewer with a lot of boiling water.

4. Pump dredging

Plug the rubber hose of the air pump into the sewer, put a small amount of clean water, block the pipe opening with a cloth, and constantly pump air in to dredge the pipe.

5. Hydraulic dredging

Take a plastic pipe with a diameter of 10mm and a length of about 1m, and one end is tightly sleeved on the faucet.

Insert the other end into the blockage of the pool, wrap a cloth around the rubber tube and plug the lower water inlet of the pool.

Turn on the tap and flush the blockage away with the maximum amount of water.

推薦連結:安老按揭